Black IPA Brew Day

Today Desert Penguin ventured into a type of beer I never thought we'd brew - an IPA! To change it up and make it not all about the hops, we decided on a black IPA. It's the brew recommended for January by our new 2015 home brew calendar. We also wanted the ability to experiment with some flavors and see if we could come up with something different and interesting. The black IPA recipe we're using requires some dry hopping during secondary fermentation. We picked up a new 1 gallon carboy and we're going to do a different dry hop in each of 3 different carboys. Hopefully each gallon will have different qualities given the different hops that we chose.

Brew day went very smoothly again. We headed to Annapolis home brew in the morning and got all the supplies. They were out of some of the grains we were hoping to get, but Paul saved the day with some quick rework of the recipe. The combined grains weighed about 10 lbs.

We started brewing at 4:30 pm and were all finished at 8:30 pm. This recipe is another all grain brew using brew in a bag. The new pot and brew bag worked perfectly again. We started off with 5.7 gallons of water and we brought it up to the strike temp of 159. When the water was at the ideal temp, we added the brew bag and grains. About 5 min after we started the mash, we remembered to add the pH stabilizer to help improve the efficiency. It was a 90 min mash. After the mash finished, we pulled out the bag of grains and let it drain in the strainer while bringing the wort to a boil. We were just a little shy of the ideal amount of water after the mash. We added about 2 cups of water strained through the grains.

It was a 60 min boil and we added hops at 5 different points. At the start of the boil, we added summit hops. The summit hops had a really nice smell. With 15 min left, we added chinook hops; then at 10 min left, we added centennial hops; with 5 min left, cascade hops went in; and finally more centennial hops went in at the end of the boil.

With the outside temp keeping the incoming water very cold, it only took 12 min to cool the wort to 70 degrees. We racked the wort to the primary fermentation bucket, pitched the yeast, and took it downstairs to begin the alcohol making process.

The efficiency of this batch was slightly higher (66%) than our previous BIAB brew (60%), so it resulted in a higher gravity than expected. Not a bad thing in my book. :) The goal is to hit 8.16% ABV, but it might come in slightly higher. Another very fun and successful all grain brew in a bag experience!

---> [ Black IPA Racking ]